Details: Adams Rite 7160 Electric Strike for Aluminum Jambs

Gain total control over the comings and goings of your facility. With the Adams Rite 7160 Electric Strike for Aluminum Jambs you control the latch's mechanism from a remote location. Fits a variety of door jambs and includes the UltraLine and Fire-Rated strikes.

7160 Electric Strikes with 4-7/8” faceplates are designed for mortise or cylindrical type locksets with up to 3/4” latchbolt projection without deadbolt. For use in aluminum jambs.

Specifications

Function: Remote electrical control of any door equipped with a mortise or cylindrical type lockset with up to 3/4” latchbolt projection without deadbolt. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into aluminum jamb (or opposing door) sections as shallow as 1-7/8”. Fits existing prep for discontinued Adams Rite 7560, 7860 Electric Strikes.
Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.
Case: Approximately 1” x 3-3/8” x 1-7/8” deep.
Strike Lip: Basic 7160 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.
Strike Opening: 3/4” x 1-7/16” x 5/8” deep. Bolt retainer jaw is stainless steel. Strike location must be centered on latchbolt.
Faceplate: Measures 1-1/4 x 4-7/8” Faceplate is flat, with radiused corners. Available in a wide range of architectural finishes.
Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

Current Draw/Amps:

Volts	AC Intermittent	DC Continuous
12	1.42	0.33
24	0.74	0.17

Options: Available with two monitoring signal switches which sense whether latch bolt is in strike and whether strike jaw is blocked. Choice of voltage in AC and DC for intermittent or continuous duty. Specify assembled for either fail-secure (locked when unpowered) or fail-safe (locked when powered) operation, but can be field converted to the other mode.
4603 Rectifier: Converts AC to DC, installs in low voltage line between transformer and strike. Rated 2 amps (200 PIV)
4605 Transformer: Converts 120VAC to 12/24 VAC. Rated 40 Volt-amp output assures plenty of power for strike release. Patented mounting bracket fits in knockout hole of standard junction boxes.
4606 Transformer: Plug-in version for standard wall outlet.

Standard Package

Individually boxed with mounting screws, mounting clips, and adhesive shims to accommodate jamb extrusion thickness greater or less than nominal 1/8 inch.

About Adams Rite

Adams Rite designs, manufactures and markets door hardware products to the industrial, commercial, and institutional building construction industry. Carrying an extensive line of products including locks, latches, electric strikes, exit devices and integrated door assemblies, Adam's Rite has been providing security products to the United States and beyond for over 100 years. Standing by their tradition of developing new and innovative products, Adam's Rite builds their hardware to function well and to look good doing it, designing their products to complement the modern business aesthetic while meeting safety and access codes.

Adams Rite Warranty

Electric strikes can be installed in a wide range of swinging door applications.

Consider these factors to help determine the right electric strike for your project.

Assess the type of frame and health of the opening

Material: hollow metal, aluminum or wood?
Adams Rite offers electric strikes for aluminum, hollow metal or wood doors. Please see the Adams Rite catalog to order the compatible model for your door application.
Type: hollow or concrete-filled? Concrete-filled may require additional tools. Consider using no-cut electric strikes.
Health of door and frame: can frame or door irregularities be fixed prior to electric strike installation?

Determine if door assembly has special requirements

Fire-rated Assembly (NFPA 80 Fire Doors)
Windstorm Resistant (tested to sustain winds up to 150 mph)
Outdoor Rated (UL 1034)
Preload Capable

Identify and test existing door hardware

Existing locking hardware determines the compatible electric strike and overall function of the opening

Common Accessory

2005M3 Smart Pac® III

Reduces initial voltage in timed or fail safe operations by 25% to extend the life of the electric strike.

Addition of Smart Pac to any HES electric strike extends the 5-year no-fault warranty to a 10-year no-fault warranty.

	Cylindrical with 1/2", 5/8", 3/4" Latchbolt
HES 1600, 1006, 1500	Fire Rated	Windstorm Resistant	Outdoor Rated
HES 5000	Outdoor Rated
HES 5200
HES 7501	Fire Rated	Preload	up to 15 lbs
HES 8000	Outdoor Rated	no-cut
HES 8300	Fire Rated	Outdoor Rated
Adams Rite 7100 Series
Adams Rite Ultraline® 7400 Series	Preload	up to 25 lbs

			Mortise Lockset without a Deadbolt up to 3/4" Throw Latchbolt
HES 1600, 1006, 1500	Fire Rated	Windstorm Resistant	Outdoor Rated	HES 8500	Fire Rated	Outdoor Rated	no-cut
Adams Rite 7160
			Mortise Lockset with a 1" Deadbolt
HES 1600, 1006	Fire Rated	Windstorm Resistant	Outdoor Rated

		Rim Exit Devices up to 1/2" Throw Latchbolt
HES 9400	Outdoor Rated	no-cut surface mounted	Adams Rite Ultraline® 74R2	Preload	up to 25 lbs
		Rim Exit Devices up to 3/4" Pullman Latchbolt
HES 7000	Preload	up to 15 lbs
HES 9500	Fire Rated	Outdoor Rated	no-cut surface mounted
HES 9600	Windstorm Resistant	Outdoor Rated	no-cut surface mounted
Adams Rite Ultraline® 74R1	Preload	up to 25 lbs
		Rim Exit Devices with Corbin Russwin SecureBolt® or Yale SquareBolt®
HES 9700	Fire Rated	Windstorm Resistant	Outdoor Rated	no-cut surface mounted

Available Model Numbers and Combinations

Model/SKU	Attributes
7160-315-335-3	12V, DC Continuous or Intermittent, Fail-Safe, Black Anodized, 1-3/4"
7160-340-313-3	12V, AC Intermittent, Standard/Fail-Secure, Dark Bronze Anodized, 1-3/4"
7160-415-628-5	16V, DC Continuous or Intermittent, Fail-Safe, Clear Anodized, 2"
7160-510-628-12	24V, DC Continuous or Intermittent, Standard/Fail-Secure, Clear Anodized, 2-7/8"
7160-547-313-1	24V, AC Intermittent, Monitor/Fail-Safe, Dark Bronze Anodized, 1-1/2"
7160-547-335-9	24V, AC Intermittent, Monitor/Fail-Safe, Black Anodized, 2-1/2"
7160-515-313	24V, DC Continuous or Intermittent, Fail-Safe, Dark Bronze Anodized, None
7160-519-628-2	24V, DC Continuous or Intermittent, Monitor/Fail-Secure, Clear Anodized, 1-5/8"
7160-349-628-7	12V, AC Intermittent, Monitor/Fail-Secure, Clear Anodized, 2-1/4"
7160-340-313-12	12V, AC Intermittent, Standard/Fail-Secure, Dark Bronze Anodized, 2-7/8"
7160-417-313-7	16V, DC Continuous or Intermittent, Monitor/Fail-Safe, Dark Bronze Anodized, 2-1/4"
7160-419-3130	16V, DC Continuous or Intermittent, Monitor/Fail-Secure, Dark Bronze Anodized, 1-1/16" or less
7160-545-626-1	24V, AC Intermittent, Fail-Safe, Satin Chrome, 1-1/2"
7160-545-628-7	24V, AC Intermittent, Fail-Safe, Clear Anodized, 2-1/4"
7160-319-628-5	12V, DC Continuous or Intermittent, Monitor/Fail-Secure, Clear Anodized, 2"