> >>>Bobrick-B-262-130 Optional TowelMate accessory

Bobrick-B-262-130 Optional TowelMate accessory

262-130

Bobrick Surface-Mounted Paper Towel Dispenser with TowelMate Related Products

$50.10

Details: Bobrick-B-262-130 Optional TowelMate accessory

B-262-130 Product Features

MATERIALS: TowelMate Module - 18-8 S, Type 304, 24-gauge (0.6mm) stainless steel with 2B finish. TowelMate Support Rod - Black, 3/8" (10mm) diameter Nylon 6/6 Rod fastened to Module with two stainless steel sheet metal screws.

OPERATION: Optional TowelMate Accessory fits into Bobrick Model Number(s) B-262, B-2620, B-2621, B-26212 ClassicSeries Paper Towel Dispensers. TowelMate Accessory Support Rod allows dispenser to dispense paper towels one at a time without tabbing, tearing, bulging, sagging or bunching. To load paper towels in towel tray, place stacks of folded paper towels inside module with bottom paper towel leaf facing forward. Feed first sheet from bottom of the towel tray opening over the rod and through the opening to conceal rod and start dispense.

INSTALLATION: Open door of towel cabinet and remove all existing paper towels from dispenser. For installation into Gamco models, remove (2) screws and relocate rod to rear holes in adapter bracket using the furnished white spacers (2) assembled between the Support Rod ends and the adapter bracket before securing screws in place. Remove protective film from double back tape on the back of TowelMate Accessory. Position TowelMate Support Rod evenly over the towel tray opening and firmly press TowelMate Module into dispenser cabinet back. Load stacks of paper towels into cabinet, start dispense, close cabinet door.

SPECIFICATION: TowelMate Accessory module shall be type-304 stainless steel with 2B finish. Black nylon support rod, 3/8" (10mm) diameter, fastened to module with stainless steel sheet metal screws. TowelMate Accessory fits into Bobrick Model Number(s) B-262, B-2620, B-2621, B-26212 ClassicSeries, Gamco Series Model Number(s) TD-2, TD-2M, TD-2-8, TD-3, TD-3F, TD-3FS, and TD-8, and other manufacturers' similar models. Paper Towel Dispenser fitted with TowelMate Accessory shall dispense specified capacity of multifold paper towels depending on model number. TowelMate Accessory Module has a Nylon Support Rod fitted across the center of the towel tray opening to dispense paper towels one at a time without tabbing, tearing, bulging, sagging or bunching (falling through the opening). TowelMate reduces paper towel waste by 20% - 40% and complies with US EPA Reduce & Reuse Resource Conservation Initiative.

Bobrick TowelMate

Bobrick TowelMate reduces towel usage by more than 20%!

One towel at a time, every time.

Eliminates the dispensing of handfuls of towels with the “Perfect Pull Rod” separating and dispensing individual C- or multifold towels. Patented TowelMate accessory installs in existing cabinets without tools and fits all Bobrick dispensers and similar models of other manufacturers.

How much will you save?

In a typical office building with 40 folded towel dispensers, the C-fold usage was 33 cases per month, or $8,000 per year. By using TowelMates, usage dropped 21% for a savings of $1,700 annually. There are additional savings with the use of multifold towels as well as reduced maintenance expense. Visit bobrick.com for an interactive Cost Savings Calculator.

Specifying TowelMates and LinerMates:

When selecting folded towel dispensers and/or waste receptacles, use the model number of your choice and add the appropriate TowelMate and LinerMate model numbers to complete your specification. Accessories can also be ordered for similar models of like description. See chart on page 7.

Eliminate liner overhang.

LinerMate improves restroom appearance by securing trash bag into waste receptacle for a flush, out-of-sight fit.