> >>>Cal-Royal 7700 Series Exit Device

Cal-Royal 7700 Series Exit Device Builder

Choose your Fire Rating

Edit
Continue

Choose your Function

Edit
Continue

Choose your Door Type

Edit
Continue

Choose your Size

Edit
Continue

Choose your Alarm

Edit
Continue

Choose your Signal Switch Type

Edit
Continue

Choose your Handling

Edit
Continue

Choose your Anti-Microbial Coating

Edit
Continue

Choose your Electrical Option

Edit
Continue

Choose your Power Supply

Edit
Continue

Choose your Delayed Egress

Edit
Continue

Shipping: Item normally ships out within 1-2 Weeks (excluding transit time). If out of stock it can take up to 3-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

Details: Cal-Royal 7700 Series Exit Device

For use in institutions, schools, universities,commercial buildings where heavy duty reliable operation is a requirement.

Features

  • ANSI A156.3, GRADE 1 heavy duty exit device in surface vertical rod and rim designs.
  • Retrofits Von Duprin 99 & 98 Series using 7700 Escutcheon trim
  • Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing.
  • Trims are thru bolted for additional security.
  • Conforms & Meets ADA Regulations.
  • UL Listed for Panic and ULC10C, UBC 7-2-1997 codes.
  • UL Listed for Fire Exit Hardware. 3 hours.
  • (A) label rating on pairs of doors up to 8'0" × 8'0" swinging in same or opposite directions.
  • Uncompromising security and safety in single and double fire exit doors.
  • Chassis mounted unit construction. Rim and vertical rod devices are non-handed and easily reversible.
  • Available in many different functions. Lever and escutcheon trims are grade 1 construction with clutch on rose trims. Escutcheon trims are rigid and covers 161 cut out.

Specifications

7700 & F7700 Exit Devices

For Doors
1 3/4" thick standard optional 21/2" thick. 4 1/2" minimum stile width for single or double door application using standard 938 strike and pull or lever, thumbpiece and escutcheon trims. 2-3/4" backset
Chassis
Nonferrous alloy (Panic Grade), steel (Fire Grade)
Cover
Non-ferrous plated material. Covers stock hollow metal doors with 161 cut out
Mounting
Furnished with wood and machine screws. Available thru bolts on request. Thru bolts are included and in standard packaging on fire rated devices
End Cap
Brass, bronze or stainless steel construction
Alarm
Available. Prefix NALRM before PART#
Hand
Non-handed, center hub for 2 3/4" backset
Latch Bolt
Stainless steel 3/4" throw with anti-pick feature
Spring
Stainless steel throughout
ANSI Standard
A156.3, Grade 1
Rail Assembly
Heavy gauge extruded aluminum body with stainless steel push pad
Dogging Feature
Allen-type key furnished standard on non-fire labeled devices
Mullion
Available
UL and ULC Listed
7700 Series for panic. F7700 series for fire exit hardware for all types of 4' × 8' single doors and 8' × 8' double doors for up to 3 hours fire labeled installations, conforms to standards UL10C and UBC 7-2-1997 codes
Strike
938 packed standard
Finish
Architectural plated finishes
Electronic Functions
(ELR) Electrical Latch Retraction and RX & LX Signal Switch available

7760V & F7760V LBR7760V & LBRF7760V Vertical Rod

For Doors
1 3/4" thick standard optional 2 1/4" thick. 3 3/4" minimum stile width required for single door application. 3 1/2" minimum stile width required for double door application. Lever, thumb piece and escutcheon trims available. 2 3/4" backset
Top Chassis
Non-ferrous alloy (Panic Grade), steel (Fire Grade)
Cover
Non-ferrous plated material. Covers stock hollow metal doors with 161 cut out
Mounting
Furnished with wood and machine screws. Thru bolts are included and standard packaging on fi re rated devices
End Cap
Brass, Bronze or Stainless Steel construction
Alarm
Available. Prefi × NALRM before MODEL #
Hand
Handed. Easily fi eld reversible. Specify at time of order LHR, RHR for convenience
Latch Bolt & Spring
Stainless steel
Spring
Stainless steel throughout
ANSI Standard
A156.3, Grade 1
Rail Assembly
Heavy gauge extruded aluminum body with Stainless Steel push pad
Strike
See strike page
Dogging Feature
Allen-type key furnished standard on non-fi re labeled devices
UL and ULC Listed
7760 Series for panic. F7760 Series for fi re exit hardware for all types of 8' × 8' double doors for up to 3 hour fi re labeled installations. Conforms to standards UL10C and UBC 7-2-1997 codes
Finish
Architectural plated fi nishes
Electronic Functions
(ELR) Electrical Latch Retraction and RX & LX Signal Switch available

MCVR7700 & MCVR7700 / WCVR7700 & WCVR7700 Metal / Wood Door Concealed Vertical Rod

LBR (Optional)
No bottom strike. Free access for wheel chairs, stretchers and carts which eliminates tripping and potential disfiguration of floors due to dragging of bottom bolts
For Doors
Metal. 1 3/4" (44.5mm) minimum thickness 4 1/2" (114mm) minimum stile width
Chassis
Nonferrous alloy (Panic Grade), steel (Fire Grade)
Chassis Cover
Non-ferrous plated material
Mounting
Furnished standard with machine screws
End Cap
Brass, Bronze or Stainless Steel construction
Hand
Handed. Easily field reversible. Specify at time of order LHR, RHR for convenience
ANSI Standard
A156.3, Grade 1
Strikes
260 top and 265 bottom
Top and Bottom Bolts
Stainless Steel . Top and bottom bolt travel 7/16" (11mm) Projection adjustable up to 1" (25mm)
Fire Exit Hardware
FMCVR7700 Series for fire exit hardware for all types of 8' × 8' Double doors for up to 3 hour fire labeled installations, conforms to standards UL10C and UBC 7-2-1997 codes
Rail Height
Specify door opening and mounting height of center line of rail when ordering a Vertical Rod Exit Device 41" from floor
Trim
See Trim Designs section
Electric Functions
(ELR) Electrical Latch Retraction and RX & LX Signal Switch available
Alarm
Prefix "NALRM" before PART#
Dogging Feature
Cylinder dogging available for non rated applications

MR7700 / FMR700 Mortise Lock Rim Series

For Doors
Wood/metal. 1-3/4" (44.5mm) minimum thickness. 4-1/2" (114mm) minimum stile width
Chassis
Nonferrous alloy (Panic Grade), steel (Fire Grade)
Chassis Cover
Non-ferrous plated material
End Cap
Brass, bronze or stainless steel construction
Handing
Handed. Specify RHR or LHR
ANSI Standard
A156.3, Grade 1
Mounting
Furnished standard with wood and machine screws
Strikes
Standard ANSI strike
Mortise Lock
Grade (1) for 1-3/4" (44.5mm) thick doors. Reversible. Fits door prepared for ANSI Standard A115.1
Fire Exit Hardware
FMR7700 Series for fire exit hardware for all types of 8' × 8' double doors for up to 3 hour fire labeled installations, conforms to standards UL10C and UBC 7-2-1997 codes
Trim
See Trim Designs section
Electric Functions
(ELR) Electrical Latch Retraction and RX & LX Signal Switch available
Alarm
Prefix "NALRM" before PART#
Dogging Feature
Cylinder dogging available for non fire rated applications

GLS7700 Series Narrow Stile Exit Rim Devices

For Doors
Wood, Metal or Aluminum Glass doors with 1 3/4" minimum stile width, 1 3/4" thickness for single or double door application
Chassis
Non-ferrous alloy (Panic Grade)
Cover
Non-ferrous plated material
Mounting
Furnished with wood and machine screws. Thrubolts available upon request
End Cap
Brass, Bronze or Stainless Steel construction
Alarm
Available. Prefix NALRM before PART#
Hand
Non-handed
Latch Bolt
Stainless steel 3/4" throw
Spring
Stainless steel throughout
ANSI Standard
A156.3, Grade 1
Rail Assembly
Heavy gauge extruded aluminum body with Stainless Steel push pad
Strikes
246 packed standard. Optional 247 strike. (See strike page)
Dogging Feature
Allen-type key furnished standard
Mullion
Available
UL and ULC Listed
GLS7700 Series for Panic & Safety for all types of 4' × 8' single doors and 8' × 8' double doors
Finish
Architectural plated finishes
Electronic Functions
(ELR) Electrical Latch Retraction and RX & LX Signal Switch available

GLSCVR7700 / FGLSCVR7700 Narrow Stile Concealed Vertical Rods

For Doors
Metal or Aluminum Glass doors with 1 3/4" minimum stile width, 1 3/4" thickness for single or double door application
Chassis
Non-ferrous alloy (Panic Grade)
Cover
Non-ferrous plated material
Mounting
Furnished with wood and machine screws
End Cap
Brass, Bronze or Stainless Steel construction
Hand
Handed. Specify RHR or LHR
Top and Bottom Bolts
Stainless steel. Top and bottom bolt travel 7/16" (11mm) Projection adjustable to 1" (25mm)
Spring
Stainless steel throughout
ANSI Standard
A156.3, Grade 1
Rail Assembly
Heavy gauge extruded aluminum body with Stainless Steel push pad
Strikes
260 Top and 265 Bottom strikes packed standard (See strike page)
Dogging Feature
Allen-type key furnished standard
Mullion
Available
UL and ULC Listed
GLSCVR7700 Series for Panic & Safety for all types of 4' × 8' single doors and 8' × 8' double doors for Panic & Safety
Finish
Architectural plated finishes

Suggested Architect's Specifications:

  • All exit devices shall be of touch bar design with smooth operation and be operative over 2/3 of the door's clear opening width.
  • All exit devices must be listed under "Panic Hardware" in the Accident Equipment List of Underwriters' Laboratories, Inc. Where labeled doors are used as exits, they must be equipped with labeled Fire Exit Hardware and UL10C, UBC-7-2-1997 codes.
  • All springs shall be of stainless steel throughout.
  • All exit devices shall be of chassis mounted unit construction.
  • All exit devices shall be ANSI A1563.3, Grade 1.

Options

  • Alarm
  • Electrified
  • Delayed Egress

SH Specify Left Hand Reverse (LHR) or Right Hand Reverse (RHR) for convenience on VERTICAL ROD ONLY. RIM DEVICES are non-handed and are Easily field reversible.

Architect's Specifications

  • All exit devices shall be of touch bar design with smooth operation and be operative over 2/3 of the door's clear opening width.
  • All exit devices must be listed under "Panic Hardware" in the Accident Equipment List of Underwriters' Laboratories, Inc. Where labeled doors are used as exits, they must be equipped with labeled Fire Exit Hardware and UL10C, UBC-7-2-1997 codes.
  • All springs shall be of stainless steel throughout.
  • All exit devices shall be of chassis mounted unit construction.
  • All exit devices shall be ANSI A1563.3, Grade 1.

NALARM Feature

  • 1-,3-,5- minute and continuous alarm type settings available
  • ON and OFF power switch
  • Alarm sound frequency is 120 db
  • Alarm unit has internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and breached.
  • The key switch to turn alarm off is a standard 1 1/4" cylinder with "C" keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal.
  • Alarmed units are supplied with a micro switch, which monitors the push rail and the latch bolt for fool proof security on rim devices.
  • Unit includes "EMERGENCY EXIT ONLY"

Downloads

Video