The Dyson Airblade dB hand dryer is the next step in the Airblade™ series and is replacing the AB04. The Dyson Airblade dB offers a 50 percent drop in noise reduction from their original Dyson Airblade™ hand dryer by improving two key areas of noise - the apertures and the motor. The Dyson Airblade dB has no drop in performance and is still one of the most hygienic hand dryers through the use of a HEPA filter to remove 99.97 percent of all bacteria.
Product Details
- Replaces the AB04
- 50% drop in noise reduction from the original Dyson Airblade™ by improving the apertures and the motor
- Airblade™ technology uses a sheet of air traveling at 420 MPH to dry hands in 12-sec.
- HEPA filters remove 99.97% of bacteria from the air
- Dyson digital motor V4 spins at 92,000 times a min. drawing in 9.25-gal. of air a sec.
- Water ingress protection to IP35 to keep the internal components protected from high velocity water damage
- Galvanized steel back plate/mounting bracket
- Polycarbonate ABS construction is durable and resistant to damage and vandalism
- 120 - 127V/50 - 60 Hz/1-ph, 1400W
- Overall Dimensions: 11⅞W × 9¾in. D × 26-in. H
- HACCP International and NSF Certified
Note: minimum installation requires 7⅞in. from the floor and 2-in. from both sides and above
Faster Drying, 50% Quieter
- Airblade™ technology uses a sheet of air traveling at 420 MPH to scrape water off your hands, which dries your hands in 12-sec.
- The Dyson digital motor V4 pulls in 9.25-gal. of air a second to generate the airflow needed for these fast drying times
- The motor only has 3 moving parts, so there are fewer parts to breakdown or wear out
- Airblade dB has improved their apertures by redesigning their shape and has improved the motor for a 50% reduction in noise from the original Dyson Airblade™
Hygienic by Design
- The Airblade dB has been approved by HACCP International for safe use in the food and beverage industry, which few other hand dryers can claim
- HEPA filter that removes 99.97% of bacteria in the air used for drying
- Touch-free design keeps you from having to press any buttons or touching any part of the unit after washing your hands
- An antimicrobial coating is infused in the sealed casing to inhibit the development of bacteria and mold
Lower Environmental Impact
- Compared to other hand dryers, the Airblade™ produces 72% less CO2 and 68% less than paper towels
- Running costs of the Airblade™ can be up 69% less than other hand dryers and up to 97% less than paper towels
- Standby power consumption is less than 0.5W
The Dyson Airblade dB hand dryer wipes hands dry with a high-velocity sheet of air in just 12 seconds. Airblade technology results in air traveling 420 mph with a 1400W motor. The HEPA filter removes 99.97% of bacteria from the air used to dry hands. Touch-free operation. NSF & HACCP approved. Polycarbonte ABS casing with homogeneous anti-microbial additive. Grey. Eco Friendly
Product Specifications
- Frequency
- 60 Hz
- Controls
- Automatic
- Cover
- Metallic
- Drying Cycle
- 12 Seconds
- Amps
- 12
- Specialty Options
- HEPA Filter
- Watts
- 1400W
- Warranty
- 5 Year Parts, 1 Year Labor
- Voltage
- 110V/120V
- Weight
- 24.10lbs