List of Model/SKU Numbers for the RCI C800 Series Grade 1 Heavy-Duty Cylindrical Locksets
Here is a list of the Model/SKU Numbers and their corresponding attribute combinations associated with the Model.
RCI C800 Series - Grade 1 Heavy-Duty Cylindrical Locksets
The C800 Series Grade 1 heavy-duty cylindrical locksets provide exceptional security, enhanced aesthetics, and rugged dependability. These premium locks are built with a high performance cylindrical chassis for all applications where ANSI/BHMA A156 2 Series 4000 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of levers or knob trim design.
Applications
- Educational facilities
- Municipal buildings
- Health care facilities
- Retail outlets
- Office complexes
- Hotels
- Apartments
- Churches
- Airports
- Warehouses
- Available on Satin Chrome (626) finish only. Consult factory for other finishes.
- When locked, the "clutch" disengages outside lever. This reduces the torque applied to the outside lever, preventing vandalism (Refer to Image 1 above)
- Cast stainless steel retractor with bronze roller bearings (Refer to Image 2 above)
- Thru-bolting with #10 epoxy coated bolts (Refer to Image 3 above)
- Lever set withstands torque of 1800 inch-pounds. Over twice ANSI/BHMA test value
- Tested to over four million cycles
- Ultra high strength springs eliminate lever droop.
- Fits doors ranging in thickness from 1⅝" to 1⅞". No spacers or special tools required
- Conventional "C" 6-pin Cylinder standard
- 100% continuous duty cycle (bridge rectifier supplied)
- Voltage: 12 or 24VDC
- Fail Locked/Unlocked
- Non-handed
- Satin Chrome Plated (26D) standard
- Made in the USA
Lever Types