> >>>>MS Sedco OS-12C T Safety Beam Control

MS Sedco OS-12C T Safety Beam Control

OS-12C T

Details: MS Sedco OS-12C T Safety Beam Control

The OPTEX OS-12CT active infrared safety beam system is compatible with any type of automatic door. Its control box and beam heads are designed for fast, simple installation while maintaining the highest standards of safety and reliability.

The OS-12CT has monitoring capability. It monitors all of its critical functions and notifies controls if an error occurs. Self-monitoring capability ensures a higher level of performance over the life of the sensor.

Features

  • Easy Installation
  • The OPTEX OS-12CT amplifier has screwless wiring terminals, which enables faster installation. Pressing the "Teach-In" button automatically sets the correct sensitivity and self-corrects crossed cables. One amplifier operates one or two pairs of sensor heads.
  • Reliable Sensor Heads
  • The OPTEX SH-7MC/SH-10MC sensor heads are recognized by door professionals worldwide for their reliability and resistance to sunlight and other interference. Quick-disconnect plugs make installation and service fast and easy. Cables are available in 2 lengths, 7 m (23 feet) or 10 m (33 feet).
  • Safety
  • For maximum safety, the amplifier is fail-safe, ensuring that the doors will remain open in the event of any damage to the components. Two LED indicators will blink at the initial setup to alert the installer if the OS-12CT is improperly aligned or if sensitivity is insufficient.
  • Multifunctional Design
  • The compact design and standard 15 mm beam heads mean the OS-12CT is compatible with any type of automatic door and is easy to service or maintain. Optional mounting accessories allow surface or recessed installation and include a reflector kit for simplified wiring. This safety beam is optimal for use with any sliding door, including train doors and automatic gates.
  • Monitoring Capability
  • The OS-12CT has monitoring capability. It monitors all of its critical functions and notifies controls if an error occurs. Self-monitoring capability ensures a higher level of performance over the life of the sensor.

Specifications

Installation Distance
Less than 10m (32'10'')
Detection method
Point to point near infrared light beam
Power Supply
12 to 24V AC
12 to 30V DC
Current Draw
160mA Max.
Operation indicator
Stand-by: Green ON (Beam1) /Red ON (Beam2)
Detection active: Green OFF (Beam1) /Red OFF (Beam 2)
Insufficient sensitivity: Green blinking (Beam1) /Red blinking (Beam2)
Test input error: Simultaneous twice blinking (Red & Green)
Test input
Opto coupler voltage 5 to 30VDC
Current 6mA Max. (30VDC)
Safety Output (Initial setting)
50V 0.3A (Resistance Load)
N.O./N.C. Switchable
Response time
Approx. 0.1 sec (from the moment of beam cut-off)
Relay Hold Time
Approx. 0.5 sec
Operating temperature
-20C to +55C (-4F to 131F)
Weight Amplifier: 63g (2.2 oz)

Applications

  • Public Buildings & Facilities
  • Commercial & Industrial Buildings
  • Government & Military Facilities
  • Retail & Strip Malls
  • Multifamily & Mixed-Use

Downloads