Precision 2200 Apex Surface Exit Device - Reversible, Wide Stile



Details: Precision 2200 Apex Surface Exit Device - Reversible, Wide Stile

Apex 2200 Series - Reversible (Device Only)

Apex FL2200 Fire Exit Series - Reversible


For all types of single and double door applications. Available for 1-3/4" to 2-1/4" thick, up to 4'-0" wide by 10'-0" high openings. For thicker doors, consult factory. Furnished standard for 1-3/4" thick, 3'-0" wide by 7'-0" high openings.
Covers ANSI A115.2 (Type 161), A115.18 cylinder lock and A115.1 (Type 86) Mortise Lock preparation.
Functions are field selectable. The device is furnished for a desired function if specified. If not specified the "03" function is furnished standard.
Base Material
The Covers, Touchbar, Device Channel, Lock/Hinge Side Filler, Vertical Rods and End Cap are furnished of heavy wrought Brass, Bronze or Stainless Steel. US28 Devices are furnished with Aluminum, Brass, Bronze and Stainless Steel components.
Investment Cast Steel, Zinc Dichromated.
Top Latchbolt
Stainless Steel, Deadlocking, 3/4" throw.
Bottom Bolt
Steel plated, independent action 5/8" throw, with adjustment range to suit 3/4" door undercut.
Top Strike
No. S300 Surface applied, Investment Cast Stainless Steel, Black Powder Coated furnished standard.
Bottom Strike
No. S460, Flush mounted, Steel, Black Powder Coated.
1/4" turn hex key dogging standard. NOT available on Fire Exit Hardware.
Touchbar Height
39-15/16” from floor standard. Specify required height if other than standard.
Reversible for all functions and trims. Standard packing RHRB.
UL Listed
Panic and Fire Exit Hardware. For FIRE EXIT HARDWARE Ratings see page 33. Conforms to UL10C and UBC 7-2.
Devices are BHMA certified ANSI 156.3, Grade 1.
605, 606, 612, 613, 622, 625, 626W, 628, 630, 690
Rim type, not furnished standard. Specify when required.
Stile Width
Stainless Steel, Deadlocking, 3/4" throw.
Less Bottom Rod (LBR) Option
Specify suffix "LBR" (e.g. 2208LBR). See UL FIRE LABEL RATING chart on page 39. Fire Rated Devices include FB277 Fire Bolt Assembly.
Retrofit Applications
The 2200 and FL2200 Series Devices are designed to retrofit into other manufacturers' mounting hole locations. 1700 Series Pull Trim and 4900 Series Lever Trim may also be factory set for these applications by specifying prefix "R" (e.g. 2208 R4908A).
Apex 22 Series - Reversible
The 22 Series Device is designed to be compatible with many manufacturers' Access Control exterior trim. The device incorporates a center driven cam to receive the tailpiece of the access control product. The tailpiece rotation required to retract the latch is a minimum of 50 degrees.

Precision Apex 2000 Exit Devices Video