RCI 1300 Series Electrified Rim Exit Device No Dogging with Alarm Module (9V Battery)

$995.00

Details: RCI 1300 Series Electrified Rim Exit Device No Dogging with Alarm Module (9V Battery)

Standard Features

  • Model 1300 includes a 12⁄24VDC dual voltage continuous-duty solenoid which provides a remote unlock feature for controlled entry.
  • Field Selectable 12⁄24 VDC (24VDC@0.4A / 12VDC@0.8A)

Plus All The Same Features As The 1200 Mechanical Rim Exit Devices:

  • Weather resistant for outddor use
  • Current of less than 800mA @ 12VDC and 400mA @ 24VDC is required to unlock the device or to dog it unlocked. (fire rated devices must be powered through contact of a fire-alram system relay)
  • All models re-latch
  • Pre-assembled for easy installation
  • Camlock and cylinder dogging available (for non-fire labeled doors)
  • Choice of 3 alarm modules (standard)
  • Standard lengths for 36" (3 feet) and 48" (4 feet) doors
  • Can be field cut for undersized doors
  • Non-handed for installing on all types of doors, including narrow stile aluminum
  • High security, exceeding a 1" deadbolt
  • Made in the USA

Options

1200D/1300D
Cam lock dogging
1200F/1300F
Fire labeled exit device, no dogging
10
Alarm module (9V battery supplied)
20
10-26 VDC alarm module (remote power with battery backup; 9V battery supplied)
30
10-26 VDC alarm module (remote power only)
SS1
SPDT Signal Switches
SS2
Two SPDT Signal Switches
LMS
Lock Monitor Switch
DDS
Double Door Strike

Finishes

28
Aluminum (BHMA 628)
40
Dark Duranodic (BHMA 710)

Trim Options

08-L
Lever Trim
08N-L
Narrow stile lever trim
08E-L
Electrified lever trim
08NE-L
Narrow stile electrified lever trim
03-P
Pull Trim

Specifications

Signal Switches*
Activated by depressing push bar. Switches can be specified for all types of access controls. SS1 - SPDT rated 3A@30VDC (Inductive), 4A @ 30VDC (Resistive) SS2 - 2SPDT rated 3A @ 30VDC (Inductive), 4A @ 30VDC (Resistive)
Lock Monitor Switch
For remote alarm monitoring of latch position. Normally opened, normally closed contacts.
Push Bar Inserts
Black vinyl insert supplied. Allows inserts to be added by removing push bar end cap and sliding insert into the
groove of the push bar.
Alarm Module
10 - Operated by a 9V alkaline battery (supplied)
  • 20 - Remotely powered field-selectable 10 to 26VDC power with a 9V battery backup (supplied)
  • 30 - Remotely powered field-selectable 10 to 26VDC power.
  • Low Battery AlertAudible chirp indicates low battery (1 chirp/minute). Activated by 7.6 voltsCurrent DrawElectrified Trim 155mA@24VDC Alarm Module 20 - 0.5 microA in Standby position; 16mA when soundingAlarm Module 30 - 0.5 microA in Standby position; 16mA when sounding
    Alarm Module Current Draw Alarm Module 10 - 0.5 microA in Standby position; 16mA when sounding
    Alarm Horn Power 110db piezo horn; field-selectable continuous horn or 3 to 5-minute sound and reset; field-selectable intermittent
    beep or steady horn. Activated by depressing push bar when in the "Alarm On" position.

Available Model Numbers and Combinations

Model/SKU Attributes
1310A x 28 Brushed Anodized Aluminum, 32"-36"
L1310A x 28 Brushed Anodized Aluminum, 34"-48"
1310A x 40 Brushed Anodized Dark Bronze, 32"-36"
L1310A x 40 Brushed Anodized Dark Bronze, 34"-48"