Reduced price! Rixson 117/147/195-3/4" Offset Pivot Sets (Includes Top Pivot)

Rixson

Rixson 117/147/195-3/4" Offset Pivot Sets (Includes Top Pivot)

117/147/195

$505.44

?

Details: Rixson 117/147/195-3/4" Offset Pivot Sets (Includes Top Pivot)

Rixson¾" Offset Pivot Sets (Includes Top Pivot)

Model 117 Regular (250#) Interior

Application

  • Interior Doors
  • Weight to 300 lbs
  • Door Width up to 3'6" (1067mm)
  • Handed

Product Description & Features

  • Standard top pivot 180 included
  • 119 intermediate pivot recommended (order separately)
  • Bottom pivot mortised into floor
  • Available for fire door assemblies up to three hours — specify F117. Intermediate pivot required by UL. Specify FM19, (order separately)
  • For 20-minute label suffix "—20" to the part number
  • Non-ferrous base material
  • Doors up to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
  • 3/4" (19mm) offset (measured from centerline of pivot to face of door)
  • Available for 1½" (38mm) offset (door weight 150 lbs) for doors with cladding or frame molding.
  • Door edges must be beveled⅛" in 2"
  • Furnished with wood and machine screws
  • Extended spindles available in½" (13mm increments up to 2" (51mm) longer than standard
  • Doors will swing 180°, trim permitting

Model 147 Regular (500#) Interior/exterior

Application

  • Exterior or Interior Doors
  • Weight to 600 lbs.
  • Door Width up to 4'0" (1219mm)
  • Handed

Product Description & Features

  • Standard top pivot 180 included • M19 intermediate pivot required
  • Bottom pivot mounts directly to floor
  • Uses same arm and cap as 27 floor closer
  • Available for fire door assemblies up to three hours (ferrous material) — specify F147. Intermediate pivot required by UL. Specify FM19 (order separately)
  • For 20-minute label suffix "—20" to the part number
  • Non-ferrous base material
  • Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
  • 3/4" (19mm) offset (measured from centerline of pivot to face of door)
  • Available for 1½" (38mm) offset (door weight 350 lbs.) for doors with cladding or frame molding
  • Door edges must be beveled⅛" in 2"
  • Furnished with wood and machine screws
  • Extended spindles available in½" (13mm) increments up to 2" (51mm) longer than standard
  • Doors will swing 180°, trim permitting

Model L147 Heavy Weight (700#) Lead 1¾" Door

Application

  • Exterior or Interior Doors
  • Lead-Lined/Heavy/High Traffic Doors
  • Weight to 800 lbs
  • Door Width up to 4'0" (1219mm) Handed

Product Description & Features

  • Standard top pivot L180 included
  • ML19 intermediate pivot required (order separately)
  • Bottom pivot mounts directly to floor
  • Doors with lead lining under the skin should also use this product.
  • Screw holes in top pivot and bottom arm spaced to straddle lead lining in the middle of the door
  • Available for fire door assemblies up to three hours for 1¾" (44mm) doors only (ferrous material) — specify FL147. Intermediate pivot required by UL. Specify FML19 (order separately)
  • For 20-minute label suffix "—20" to the part number
  • Non-ferrous base material
  • Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
  • Available to accommodate lead in door thicknesses 1¾" (44mm), 2" (51mm), 2¼" (57mm), 2½" (64mm), or 3" (76mm) — specify when ordering
  • 3/4" (19mm) offset (measured from centerline of pivot to face of door)
  • Door edges must be beveled⅛" in 2"
  • Furnished with wood and machine screws
  • Extended spindles available in½" (13mm) increments up to 2" (51mm) longer than standard
  • Doors will swing 180°, trim permitting

Model 195 Regular (400#) Frame Attached

Application

  • Exterior or Interior Doors
  • Weight to 450 lbs
  • Door Width up to 4'0" (1219mm) Handed

Product Description & Features

  • Standard top pivot 180 included
  • 119 or M19 intermediate pivots are recommended (order separately), see page 18
  • Bottom pivot mortised into side jamb
  • Pivot set can be vertically adjusted up to 3⁄16" (5mm) after installation without the use of shims
  • Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
  • Non-ferrous base material
  • Available for fire door assemblies up to three hours. Specify F195. Intermediate pivot required by UL. Specify FM19 (order separately)
  • 3/4" (19mm) offset (measured from centerline of pivot to face of door)
  • Door edges must be beveled⅛" in 2"
  • Weight of door is borne by floor portion
  • Furnished with wood and machine screws
  • Extended spindles available in½" (13mm) increments up to 2" (51mm) longer than standard
  • Doors will swing 180°, trim permitting