Stainless steel. 1/8" door inset. For 1-3/4" doors weighing up to 600 lb., 48" max. door width. SL300 pin & barrel continuous hinges are BHMA Grade 1 certified.
Specifications
- Material
- 14 gauge 304 stainless steel with 3/16" diameter 304 stainless pin. Long-life nylon medical bearings
- Lengths
- 79", 83", 85", 95" and 119" lengths standard for nominal door heights. Custom lengths are available
- Finishes
- US32D satin stainless steel (630)
- Closers
- Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced
Load/Frequency
For 1-3/4" doors, 48" wide (max.), weighing up to 400 pounds (medium-frequency) without frame or door reinforcement; up to 600 pounds (low-frequency) without frame or door reinforcement.
SL300 Hinge Screw Count
HINGE LENGTH | DOOR SCREWS | FRAME SCREWS |
79" | 18 | 18 |
83" | 21 | 21 |
85" | 18 | 18 |
95" | 23 | 23 |
119" | 27 | 27 |
Options
UL® Labeled Fire Rating
For use
on single-mounted doors, up to 3 hours for hollow metal
doors, 1-1/2 hours for hollow metal and composite core
wood fire doors, and 20 minutes for wood doors.
Dust-Free (Medical)
- Flanged double bearings are standard on all SELECT Pin & Barrel continuous hinges except Toilet Partition hinges.
- Prevent metal-to-metal contact for longer hinge life
- Eliminate dust for "clean room" applications.
Hospital Tip
Hinges can be prepared with slanted tips for hospitals and
correctional facility applications. Handing required. Available
only on SL300, SL305, SL315 and SL200.
Raised Barrel
Swaged door leaf for Concealed and Half Surface hinges
allows door to open 180°. Handing required.
Security Studs
Stainless steel studs are mounted to frame
leaf, door leaf is drilled to accommodate studs. 3 studs are
required for hinge lengths up to 85", 4 studs are required for
hinges longer than 85". Handing required. Door and frame
must be specially prepared to accommodate security studs.
Blank Hinge
Holes are omitted for welded installations.
Preparation & Accessories
Downloads
SELECT Advantages
Corrosion-Resistant Stainless Steel
Stainless steel pin & barrel design
creates a tough, highly secure opening.
Templated Hole Pattern
SELECT hinges line up perfectly,
precisely, every time. Makes
installation easier and faster
Dust-Free (Medical) Bearings
Prevent metal-to-metal contact and
eliminate dust. Exclusive standard (no
upcharge) on all SELECT Pin & Barrel hinges.
Variety of Finishes
Available in polished, brushed and
painted finishes to match, contrast or
accent your building’s design.
3-Hr. Fire Rating
Fire-rated out of the package.
No extra parts to buy or install.
No liability worries.
Stainless Steel Pin
Delivers high tensile strength by forming
a strong, free-moving unit. Flexible and
strong in abused openings.
End Caps
Spiral-knurled steel caps seal the
barrel ends to contain hinge pin.