Reduced price! Super Lube 21010 Multi-Purpose Synthetic Grease 1/2oz Tube

Super Lube

Super Lube 21010 Multi-Purpose Synthetic Grease 1/2oz Tube

21010

Details: Super Lube 21010 Multi-Purpose Synthetic Grease 1/2oz Tube

Super Lube® Multi-Purpose Synthetic Grease is Super Lube's flagship grease. A highly versatile compound, its formula combines synthetic base fluids with PTFE micro powders to provide premium protection against friction, wear, rust, and corrosion at temperatures ranging from -45° to +450° Fahrenheit. Super Lube® grease is compatible with most other lubricants, and is a USDA/NSF listed Food Grade NLGI-2 lubricant, rated H-1 for incidental food contact.


Super Lube® Synthetic Grease will not run, drip, evaporate, form deposits, melt, or separate. This grease can be used in a wide variety of applications, on everything from fitness equipment, lawn mowers, and sewing machines to ball bearings, chains, wheels, winches, pulleys, and food processors. For a complete list of applications, or if you have a question, CONTACT US.

MUST ORDER IN INCREMENTS OF 12

Material Safety Data Sheets (MSDS) Super-Lube Certifications Super-Lube Technical Bulletins Super-Lube Applications

 

TEST TEST METHOD SUPER LUBE® MULTI PURPOSE GREASE
NLGI GRADE ASTM D217 2
NLGI CLASSIFICATION* ASTM D4950 GC-LB*
COLOR   Translucent White

TEMPERATURE RANGE

 

-45°F to 450°F (-43°C to 232°C) continuous

-50°F to +500°F (-45°C to 260°C) intermittent

VISCOSITY (BASE OIL)

cSt @ 100°C

SUS @ 40°C

ASTM D445

8

350

SPECIFIC GRAVITY ASTM D1298 .89 @ 60°F
WATER, PPM ASTM D1744 35 ppm
TAN ASTM D974 0.04 maximum
DROPPING POINT ASTM D2265 >500°F (260°C)
PENETRATION, worked (60 Strokes) ASTM D217 265-295 mm/10
FOUR BALL TEST ASTM D2596  
   LOAD WEAR INDEX   81.73 kg
   WELD POINT   400 kg
FOUR BALL EP TEST Scar diameter ASTM D 2266 <.5
LOW TEMPERATURE TORQUE @ -54°C ASTM D1478  
   Starting   0.27 N-m (0.37 in-lbs)
   10 Min Running   0.08 N-m (0.11 in-lbs)
   1 Hr Running   0.006 N-m (0.09 in-lbs)
SALT SPRAY TEST (100 hrs) ASTM B117 pass
DIELECTRIC LOSS ASTM D924 1.2 X 1012
DIELECTRIC RESISTIVITY ASTM D1169 1.7 X 1014
DIELECTRIC CONSTANT ASTM D924 2.5
OIL SEPARATION ASTM D6184 <2%
EVAPORATION LOSS 22 hours @ 212°F (100°C) ASTM D972 <1%
OXIDATION STABILITY, 100 hrs ASTM D942 6.9 kPa
TIMKEN OK LOAD ASTM 2509 40 lbs
FLASH POINT ASTM D92 >428°F (220°C)
FIRE POINT ASTM D92 >572°F (300°C)
WHEEL BEARING LEAKAGE ASTM D1263 0.2 g
WATER WASHOUT ASTM 1264 3.0%
COPPER CORROSION 24 hrs @ 100°C ASTM D4048 and D130 1B, shiny
ACID NUMBER ASTM D664 .5 mg KOH/g
WARRANTY   24 MONTHS