> >>>>Super Lube 51004 High Viscosity Oil with PTFE Teflon, 4oz Bottle
Reduced price! Super Lube 51004 High Viscosity Oil with PTFE Teflon, 4oz Bottle

Super Lube

Super Lube 51004 High Viscosity Oil with PTFE Teflon, 4oz Bottle

51004

$8.86

Details: Super Lube 51004 High Viscosity Oil with PTFE Teflon, 4oz Bottle

Synthetic Oils

Although Super Lube®, in either the aerosol or grease form, satisfies most of the general lubrication requirements of industrial equipment, machinery and tools, there are applications that are better served with lighter, pourable oils of various viscosities. Super Lube® oils are blended to answer these needs.


Super Lube® oils are specially blended, high quality, synthetic (Polyalphaolefin) lubricants that share with regular Super Lube® the added advantages of Syncolon® in suspension. Blended in weights from ultra-light to “gearbox”, these oils are non-toxic, have low volatility and pour points, have high flash and fire points, and exhibit excellent thermal stability and resistance to oxidation.


Anticorrosive, these oils will not form harmful abrasive platelets while in use. Unlike conventional oils to which PTFE has been added, the PTFE in Super Lube® remains in suspension.


Super Lube® oils are also offered without PTFE for low viscosity, air tool, hydraulic or gear oil and direct food contact applications.

Material Safety Data Sheets (MSDS) Super-Lube Certifications Super-Lube Technical Bulletins Super-Lube Applications

 

SYNCO CHEMICAL CORPORATION TYPICAL PROPERTIES SUPER LUBE® OIL W/PTFE
 
TEST TEST METHOD SUPER LUBE® OIL WITH PTFE
COLOR   Translucent White

TEMPERATURE RANGE

  

-45°F to 450°F (-43°C to 232°C) continuous

-50°F to 500°F (-45°C to 260°C) intermittent

VISCOSITY cSt @ 100°C

SUS @ 40°C

ASTM D445

13

681.5
ISO GRADE   150
REPLACES ISO GRADES   150 - 220
REPLACES SAE GRADE GEAR OILS   85W
VISCOSITY INDEX   145
SPECIFIC GRAVITY ASTM D1298 .89 @ 60°F
POUR POINT ASTM D97 -30°F (-34°C) MAX
LBS/GALLON   7.4 @ 60°F
WATER, PPM ASTM D1744 35 ppm
TAN ASTM D974 0.04 maximum
FOUR BALL TEST ASTM D2596
and D2783		  
  LOAD WEAR INDEX   42 kg
  WELD POINT   250 kg
FOUR BALL EP TEST Scar diameter ASTM D 2266 
and D4172		 <0.5
SALT SPRAY TEST (100 hrs) ASTM B117 pass
DIELECTRIC LOSS ASTM D924 1.2 X 1012
DIELECTRIC RESISTIVITY ASTM D1169 1.7 X 1014
DIELECTRIC CONSTANT ASTM D924 2.5
EVAPORATION LOSS 22 hours @ 212°F(100°C) ASTM D972 <2%
OXIDATION STABILITY, 100 hrs ASTM D942
and D943		 4 psi
TIMKEN OK LOAD ASTM 2509 
and 2782		 40 lbs
FLASH POINT ASTM D92 >428°F (220°C)
FIRE POINT ASTM D92 >572°F (300°C)
COPPER CORROSION 24 hrs @ 100°C ASTM D4048
and D130		 1A
ACID NUMBER ASTM D664 .5 mg KOH/g
WARRANTY   24 MONTHS

All orders must be in increments of 6.