Reduced price! Super Lube 52004 Low Viscosity Oil without PTFE, 4oz Bottle

Super Lube

Super Lube 52004 Low Viscosity Oil without PTFE, 4oz Bottle

52004

$8.86

Details: Super Lube 52004 Low Viscosity Oil without PTFE, 4oz Bottle

Synthetic Oil Without PTFE (Low Viscosity, Light Weight Oil)

Super Lube® Synthetic Lightweight Oil has a lower viscosity than Super Lube® Oil with PTFE and should be used in place of conventional 8 –10 cSt oils. It is ideal for misting, dripping, spindle oil applications, and as a food-grade chain lubricant and rust inhibitor.

 

Although Super Lube®, in either the aerosol or grease form, satisfies most of the general lubrication requirements of industrial equipment, machinery and tools, there are applications that are better served with lighter, pourable oils of various viscosities. Super Lube® oils are blended to answer these needs.


Super Lube® oils are specially blended, high quality, synthetic (Polyalphaolefin) lubricants that share with regular Super Lube® the added advantages of Syncolon® in suspension. Blended in weights from ultra-light to “gearbox”, these oils are non-toxic, have low volatility and pour points, have high flash and fire points, and exhibit excellent thermal stability and resistance to oxidation.


Anticorrosive, these oils will not form harmful abrasive platelets while in use. Unlike conventional oils to which PTFE has been added, the PTFE in Super Lube® remains in suspension.


Super Lube® oils are also offered without PTFE for low viscosity, air tool, hydraulic or gear oil and direct food contact applications.

All orders must be in increments of 6.

Material Safety Data Sheets (MSDS) Super-Lube Certifications Super-Lube Technical Bulletins Super-Lube Applications

 

SYNCO CHEMICAL CORPORATION TYPICAL PROPERTIES SUPER LUBE® LIGHTWEIGHT OIL

 
 
TEST TEST METHOD SUPER LUBE® LIGHTWEIGHT OIL
COLOR   Translucent

TEMPERATURE RANGE

 

-40°F to 500°F (-40°C to 260°C) continuous

-40°F to 650°F (-40°C to 343°C) intermittent

VISCOSITY cSt @ 100°C

SUS @ 40°C

ASTM D445

8
350

ISO GRADE   68
REPLACES ISO GRADES   46 - 100
REPLACES SAE GRADE GEAR OILS   80W
VISCOSITY INDEX   145
SPECIFIC GRAVITY ASTM D1298 .89 @ 60° F
POUR POINT ASTM D97 -40°F (-40°C) MAX
WATER, PPM ASTM D1744 40 ppm
TAN ASTM D974 0.02 maximum
FOUR BALL TEST ASTM D2596 and D2783  
  LOAD WEAR INDEX   27 kg
  WELD POINT   130 kg
FOUR BALL EP TEST Scar diameter ASTM D 2266 and D4172 <0.5
SALT SPRAY TEST (100 hrs) ASTM B117 pass
DIELECTRIC LOSS ASTM D924 1.2 X 1012
DIELECTRIC RESISTIVITY ASTM D1169 1.7 X 1012
DIELECTRIC CONSTANT ASTM D924 2.5
EVAPORATION LOSS 22 hours @ 212°F(100°C) ASTM D972 <2%
OXIDATION STABILITY, 100 hrs ASTM D942 and D943 4 psi
FLASH POINT ASTM D92 >450°F (232°C)
FIRE POINT ASTM D92 >525°F (300°C)
COPPER CORROSION 24 hrs @ 100°C ASTM D4048 and D130 1A
ACID NUMBER ASTM D664 0.5 mg KOH/g
WARRANTY   24 MONTHS