NGP 700SA Neoprene Gasketing Seal 3-Piece Set, Anodized Aluminum
700SA-
Details: NGP 700SA Neoprene Gasketing Seal 3-Piece Set, Anodized Aluminum
Product Features
Aluminum alloy 6063, T5 temper
Synthetic rubber polymer: Siloxane
Excellent flexibility and memory
Flame resistant
Moisture resistant
Temperature range -100°F to 500°F, remains flexible at extreme temperatures
Excellent resistance to ozone, UV and aging
Recommended for areas using FM200 or Halon Fire Suppression Systems
BHMA Certified to ANSI/BHMA A156.22 performance tests for heat, cold, air infiltration and smoke infiltration
No break in seal for closer mounting
Closer and/or overhead holder attach to frame through weatherseal section. Install seal first
Allows mounting of rim exit device strikes without notching gasketing
Head section not drilled
Jamb sections furnished with slotted holes for adjustment
Self drilling #8 (Tek type) screws furnished
May be cut to fit narrow frame stops
Specify "cut to width" on order
Silicone is black
Anodized aluminum
Options
FATT - Fast Attach Tape
Certifications
CERTIFIED by UL to CAN/ULC-S104 and ANSI/UL10B, complies with NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
POSITIVE PRESSURE - CERTIFIED by UL to ANSI/UL10C, complies with IBC, NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
AIR INFILTRATION TESTED to ASTM E283, Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors.
ACOUSTICAL TESTED to ASTM E90 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements, and ASTM E2235 Standard Test Method for Determination of Decay Rates for use in Sound Insulation Test Methods. Refer to information on pages G4 and G5 of our Gasketing catalog for test result data.
SMOKE & DRAFT CONTROL GASKETING. Certified by UL to ANSI/UL10C and ANSI/UL1784 Category 'H'; complies with IBC and NFPA 105 for use on 'S' labeled Positive Pressure Hollow Metal fire doors rated up to 3 hours, and Wood fire doors rated up to 90 minutes.
ANSI/BHMA CERTIFIED. Certified Gasketing complies with American National Standard for Door Gasketing and Edge Sealing Systems ANSI/BHMA A156.22 and is listed in the BHMA Certified Products Directory.