Details: Pemko RR_ Fire Retardant Recycled Rubber Ramp Thresholds

Fire Retardant Recycled Rubber Ramp Thresholds.

• Rubber ramps meet the requirements of ADAAG-2010; CABO/ANSI A117.1-2013; UBC; and California Title 24, Part 2.
• Rubber ramps are extruded from styrene butadiene rubber, a long-lasting, weather and ozone-resistant, abrasion and impact-resistant, and fire retardant material.
• Rubber ramps are sold in one foot increments up to 15-footLength.
• Rubber ramps can be butted together for longerLength.
• Rubber ramps are cut square on each end but are with molded rubber miter returns which can be glued to each end for a more pleasing appearance.
• Fire retardant rubber ramps are easy to install on most surfaces (including wood, concrete, tile and asphalt), using a construction adhesive. Mechanical fasteners are not required and not recommended.
• Rubber ramps are also portable. For temporary applications, an assembly which has been bonded together but has not been bonded to a base surface, stays in place by its sheer weight and can be removed from one opening and placed at another opening.
• Use RR200 (T-Rex) to glue rubber ramps to floor surfaces.
• Rubber ramps are for 1/2" and 1" offset heights.
• Rubber ramps can be cross-cut toLength or ripped to a custom offset height using a table or radial arm saw with a carbide-tipped blade. These modifications must be made in the field.