The SA-025Q Programmable Timer Module is suitable for a wide range of timed security and access control operations. Auto-sensing of input voltage and DIP switches for programming make installation easy.
Features
Timer can be set from 1 second to 60 minutes
Can be triggered via an N.O. positive (plus) trigger input signal or an N.C. negative (minus) trigger device or by powering up the unit
Relay can be programmed to activate at the start or at the end of the timing cycle
Relay can also be set to activate for one second at the end of the timing cycle
Relay can be programmed to pulse (flash) or be steady on
Built-in reset function to manually reset timing cycle
Form-C relay, contact rated 10A:24VDC/250VAC
LED indicates relay is energized
12-24VDC operation (auto sensing)
Current draw - Less than 1mA (standby) or 40mA (relay energized)
Functions programmed via DIP switches - no jumpers to cut
Specifications
Operating Voltage
12-24 VDC (auto sensing)
Current Draw
Active:40mA:12VDC, 80mA:24VDC and Standby: less than 1mA:12VDC, less than 10mA:24VDC