Stainless steel half mortise hinge with edge guard. Mounts on frame face and door edge. Tamper-resistant frame leaf cover. For 1-3/4" doors weighing up to 600 lb., 48" max. door width. SL306 pin & barrel continuous hinges are BHMA Grade 1 certified.
Specifications
- Material
- 14 gauge 304 stainless steel barrel with 3/16" diameter 304 stainless pin. Long-life nylon medical bearings
- Lengths
- 79", 83", 85", 95" and 119" lengths standard for nominal door heights. Custom lengths are available
- Finish
- US32D satin stainless steel (630)
- Closers
- Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced
Load/Frequency
For 1-3/4"doors, 48" wide (max.), weighing up to 400 lb. (medium-frequency) without frame or door reinforcement; up to 600 lb. (low-frequency)
without frame or door reinforcement.
SL306 Hinge Screw Count
HINGE LENGTH | DOOR SCREWS | FRAME SCREWS |
79" | 18 | 13 |
83" | 21 | 14 |
85" | 18 | 14 |
95" | 23 | 16 |
119" | 27 | 20 |
Options
UL® Labeled Fire Rating
For use on single-mounted doors, up to 3 hours for hollow metal doors, 1-1/2 hours for hollow metal and composite core wood fire doors, and 20 minutes for wood doors.
Dust-Free (Medical)
- Flanged double bearings are standard on all SELECT Pin & Barrel continuous hinges except Toilet Partition hinges.
- Prevent metal-to-metal contact for longer hinge life
- Eliminate dust for "clean room" applications.
Security Studs
Stainless steel studs are mounted to frame leaf, door leaf is drilled to accommodate studs. 3 studs are required for hinge lengths up to 85", 4 studs are required for hinges longer than 85". Handing required. Door and frame must be specially prepared to accommodate security studs.
Blank Hinge
Holes are omitted for welded installations.
Preparation & Accessories
Downloads
SELECT Advantages
Corrosion-Resistant Stainless Steel
Stainless steel pin & barrel design
creates a tough, highly secure opening.
Templated Hole Pattern
SELECT hinges line up perfectly,
precisely, every time. Makes
installation easier and faster
Dust-Free (Medical) Bearings
Prevent metal-to-metal contact and
eliminate dust. Exclusive standard (no
upcharge) on all SELECT Pin & Barrel hinges.
Variety of Finishes
Available in polished, brushed and
painted finishes to match, contrast or
accent your building’s design.
3-Hr. Fire Rating
Fire-rated out of the package.
No extra parts to buy or install.
No liability worries.
Stainless Steel Pin
Delivers high tensile strength by forming
a strong, free-moving unit. Flexible and
strong in abused openings.
End Caps
Spiral-knurled steel caps seal the
barrel ends to contain hinge pin.