- GSA Contract
- GS-07F-0249Y
- GSA Contract
- GS-07F-0326T
- Cage Code
- 40786
- DUNS
- 00-194-9684
Lockey TB200 Stainless Steel Hydraulic Gate Closer
Details: Lockey TB200 Stainless Steel Hydraulic Gate Closer
The TB200-SS/400-SS/600-SS Gate Closers are stainless steel automatic gate closers for use on commercial or residential gates. Unlike normal closing springs, the TB Series does not slam gates shut; rather it firmly pushes the gate closed, making it ideal for use with Lockey® security locks and other latching devices. The closing speed is pre-set to provide a controlled close of approximately 6 seconds, depending on the weight of the gate and quality of the hinges.
Features:
- Closes large and small gates up to 250 lbs. (depending on the model) easily and gently
- Made of stainless steel
- Hydraulic/Nitrogen Gas controlled closing speed
- Installs on side, top, middle or bottom of right or left hand gates
- Mounts on opening side of gate, pushing the gate closed
- Maximum opening angle of 110 degrees (LockeyUSA recommends use of a mechanical stop to restrict opening angle)
- Mounting brackets and fitting bar included
- The TB200-SS/400-SS/600-SS are not compatible with gates less than 30 inches wide
Tb200-Ss | 400-Ss | 600-Ss Opening Force Chart
- TB200-SS
- 6 lbs.
| 4 lbs. | 3 lbs. | 45 lbs. |
- TB400-SS
- 10 lbs.
| 8 lbs. | 6 lbs. | 90 lbs. |
- TB600-SS
- 13 lbs.
| 10 lbs. | 8 lbs. | 135 lbs. |
| TB200-Ss | 7 lbs. | 5 lbs. | 4.5 lbs. |
|---|---|---|---|
| 9.5 lbs. | 8 lbs. |
- TB600-SS
- 18.5 lbs.
| 13.5 lbs. | 12 lbs. |
NOTE: All measurements are taken using the 1st mounting hole on the post bracket with a 3" distance between the center of the hinge and the center of the post mounting bracket. The opening pressure will INCREASE using the 2nd, 3rd and 4th holes.These are "ADDED" opening pressures.This chart DOES NOT take into consideration the hinge arrangements, quality of hinges, ease of operation, wind, etc.
| TB200-SS (Light Duty) | TB400-SS (Medium Duty) | TB600-SS (Heavy Duty) | |
|---|---|---|---|
| 75-175 lbs. | 150-250 lbs. |
- Max. Gate Width
- 36-52 in.
| 40-64 in. | 44-72 in. |
- Max. Opening Angle
- 110 degrees
| 110 degrees | 110 degrees |
- Type of Gate Material
- Vinyl, Steel, Wood
| Vinyl, Steel, Wood | Vinyl, Steel, Wood |
- Closing/Latch Method
- Hydraulic/Nitrogen Gas
| Hydraulic/Nitrogen Gas | Hydraulic/Nitrogen Gas |
- Material
- Stainless Steel
| Stainless Steel | Stainless Steel |
- Color
- Stainless Steel
| Stainless Steel | Stainless Steel |
- Hinge Arrangements
- In-line or Offset
| In-line or Offset | In-line or Offset |
- Opening Pressure
- Appx. 3-7 lbs.
LockeyUSA SUMO™ TB200, TB400, and TB600 Hydraulic Gate Closer Installation Instructions
Available Model Numbers and Combinations
| Model/SKU | Attributes |
|---|---|
| TB-200SS | TB200 |
| TB-400SS | TB400 |
| TB-600SS | TB600 |