Details: NGP 9450 Self-Adhesive Intumescent with TPE Fin Fire and Smoke Seal

Features

NGP-Edge® Sealing System/Smoke and Draft Control Gasketing Category "G" and "H" Classified
Self-Adhesive Intumescent
NGP Intumescent materials are formulated to expand at 375°F to 400°F up to 8-10 times their original thickness; completely sealing the gap around and between doors during a fire
Moisture resistant
BHMA certified to ANSI/BHMA A156.22 performance tests for heat, cold, air infiltration and smoke infiltration
Modified acrylic pressure sensitive adhesive protected by release liner
Provides high initial adhesion and long term holding power for permanent mounting in exterior or interior locations
Resistant to aging, weathering, UV radiation, water, detergent, alcohol and the influence of chemicals
End use temperature range of adhesive, long term exposure -30°F up to 250°F
Shelf life of adhesive prior to installation is one year when stored at 75°F and 50% relative humidity or less
Rigid PVC base with flexible elastomeric fins
Flame resistant
Temperature range -60°F to 275°F
Anti-microbial: treated with an anti-microbial additive to inhibit the growth of microorganisms
REACH and RoHS compliant
20, 45, 60, 90 minute rated category B wood doors perimeter application up to: single swing 4'0 × 9'0, standard pair 8'0 × 9'0 use 9550 at the meeting edge
1/8" clearance required between door and frame
11/16" wide × 1/2" tall
Available in 36", 48", 84", 96 and 108" lengths
Brown

CERTIFIED by UL to CAN/ULC-S104 and ANSI/UL10B, complies with NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
POSITIVE PRESSURE - CERTIFIED by UL to ANSI/UL10C, complies with IBC, NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
AIR INFILTRATION TESTED to ASTM E283, Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors.
SMOKE & DRAFT CONTROL GASKETING. Certified by UL to ANSI/UL10C and ANSI/UL1784 Category 'H'; complies with IBC and NFPA 105 for use on 'S' labeled Positive Pressure Hollow Metal fire doors rated up to 3 hours, and Wood fire doors rated up to 90 minutes.
NGP-EDGE® SEALING SYSTEM. Certified by UL to ANSI/UL10C Category 'G'; required for Category B wood fire doors to meet positive pressure requirements complying with IBC, and NFPA 252. See individual products for maximum door size and ratings.
ANTI-MICROBIAL. Treated with an anti-microbial additive to prohibit the growth of microorganisms.
ANSI/BHMA CERTIFIED. Certified Gasketing complies with American National Standard for Door Gasketing and Edge Sealing Systems ANSI/BHMA A156.22 and is listed in the BHMA Certified Products Directory.

	Post-Consumer Recycled %	Pre-Consumer Recycled %
Aluminum Thresholds, Rain Drip Guards	18%	49%
Architectural Bronze Thresholds, Rain Drip Guards	70%	25%
Stainless Steel Thresholds, Rain Drip Guards	25%	3%
Rubber Ramps	0%	0%
Gasketing with Aluminum Retainers	13%	37%
Gasketing with Bronze Retainers	52%	19%
Gasketing with Stainless Steel Retainers	19%	2%
Self-Adhesive Gasketing	0%	0%
Finger Guard 2248	13%	37%
Finger Guard 2252	0%	0%
Metal Edge/Astragal sets (Steel)	25%	3%
Lite Kits & Louvers (Steel)	15%	5%
Aluminum Lite Kits & Louvers	18%	49%
Stainless Steel Lite Kits	25%	3%
Continuous Geared Aluminum Hinges	18%	49%
Stainless Steel Continuous Hinges	25%	3%