Details: Pemko SBR Fire Retardant Recycled Rubber Ramp Thresholds

Fire Retardant Recycled Threshold

• Rubber ramps meet the requirements of ADAAG-2010; CABO/ANSI A117.1-2013; UBC; and California Title 24, Part 2.
• Rubber ramps are extruded from styrene butadiene rubber, a long-lasting, weather and ozone-resistant, abrasion and
• impact-resistant, and fire retardant material.
• Rubber ramps are sold in one foot increments up to 15-foot lengths.
• Rubber ramps can be butted together for longer lengths.
• Rubber ramps are cut square on each end but are available with molded rubber miter returns which can be glued to each
• end for a more pleasing appearance.
• Rubber ramps have a superior grip, anti-slip surface and a no bump tapered lead edge. Rubber ramps are classified by
• Underwriters Laboratories, Inc., as a skid-resistant floor surface per UL standard for safety, UL410. Rubber ramps
• also meet the requirements of ASTM D 2047 and Federal Specification P-F-430C.
• Fire retardant rubber ramps are easy to install on most surfaces (including wood, concrete, tile and asphalt), using a
• construction adhesive. Mechanical fasteners are not required and not recommended.
• Rubber ramps are also portable. For temporary applications, an assembly which has been bonded together but has not
• been bonded to a base surface, stays in place by its sheer weight and can be removed from one opening and placed at
• another opening.
• Use RR200 (T-Rex) to glue rubber ramps to floor surfaces.
• Rubber ramps are available for 1/2" and 1" offset heights.
• Rubber ramps can be cross-cut to length or ripped to a custom offset height using a table or radial arm saw with a
• carbide-tipped blade. These modifications must be made in the field.

Ratings

• Barrier-Free
• Non-Skid/PemKote
• Underwriters Laboratory 4L10

Finishes

• SBR.5F: BL - Black Styrene Butadiene Rubber
• SBR.5FMR: BL - Black Styrene Butadiene Rubber
• RR1: BL - Black Styrene Butadiene Rubber