> >>>Pemko 90137_NB Brush Gasketing / Door Bottom, 90-Degree
Previous Next

Pemko 90137_NB Brush Gasketing / Door Bottom, 90-Degree

90137

$20.97

?

Details: Pemko 90137_NB Brush Gasketing / Door Bottom, 90-Degree

Brush Door Sweeps are designed to seal the gap between the bottom of the door and the top of the threshold or floor surface. They are usually supplied with a flat flange. The flat flange provides the best contact between the brush and the threshold or floor surface.

  • Design permits use as a concealed seal for many applications.
  • Slotted holes for adjustment.
  • All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
  • All brush seals consist of densely compressed nylon filaments encased in high quality aluminum retainers. These products are ideally suited for hollow metal and wood door (in-door sweep, jamb/header gasketing, and split astragal) applications. Also use our brush weatherstripping products on overhead doors, sectional doors, sliding doors, and automatic doors.
  • All brush seals greatly reduce the infiltration of light, air, wind, rain, and snow; prevent heat loss; control the penetration of smoke and fumes.
  • The dense nylon filaments conform to the contours of every sealing surface, providing a superior seal with extremely low closing force.
  • Brush remains flexible down to -40°F and has a melting point above 400°F.
  • UV stabilized, dependable, long-lasting, cost-effective.
  • Nylon brush insert is designated by a "NB" following the finish code.
  • All brush seals come with #6 × 5/8" stainless steel sheet metal screws.
  • Punched with slotted holes for adjustment (except 35° angle types which are drilled with 1/8" hole).
  • Slotted holes for easy adjustment.
  • Design permits use as a concealed seal for many applications.
  • This brush gasketing is supplied with a Nylon Brush ("NB") - item number P516137 (available in gray and black).

Ratings

  • BHMA Certified
  • Smoke Tested - UL1784
  • Fire Rated - UL10C - Positive Pressure
  • Underwriters Laboratory 4L10
  • GREENGUARD Gold Certified

Finishes

  • 90137CNB: C - Clear Anodized Aluminum with Gray Nylon Brush insert
  • 90137DNB: D - Dark Bronze Anodized Aluminum with Black Nylon Brush insert

Documentation

Available Model Numbers and Combinations

Model/SKU Attributes
90137CNB-12 12", Clear Anodized Aluminum with Gray Nylon Brush insert
90137CNB-24 24", Clear Anodized Aluminum with Gray Nylon Brush insert
90137CNB-36 36", Clear Anodized Aluminum with Gray Nylon Brush insert
90137CNB-48 48", Clear Anodized Aluminum with Gray Nylon Brush insert
90137CNB-72 72", Clear Anodized Aluminum with Gray Nylon Brush insert
90137DNB-12 12", D - Dark Bronze Anodized Aluminum with Black Nylon Brush insert
90137DNB-24 24", D - Dark Bronze Anodized Aluminum with Black Nylon Brush insert
90137DNB-36 36", D - Dark Bronze Anodized Aluminum with Black Nylon Brush insert
90137DNB-48 48", D - Dark Bronze Anodized Aluminum with Black Nylon Brush insert
90137DNB-72 72", D - Dark Bronze Anodized Aluminum with Black Nylon Brush insert
9013710BE-NB-12 12", Satin Bronze Powder Coat
9013710BE-NB-24 24", Satin Bronze Powder Coat
9013710BE-NB-36 36", Satin Bronze Powder Coat
9013710BE-NB-48 48", Satin Bronze Powder Coat
9013710BE-NB-72 72", Satin Bronze Powder Coat

View All Model Numbers and Options